Difference between revisions of "Wireguard"
From Briki
| Line 4: | Line 4: | ||
But note that `AllowedIPs` on the client should be `AllowedIPs = 0.0.0.0/0, ::/0` to use as a VPN for everything (more detail here: https://docs.pi-hole.net/guides/vpn/wireguard/route-everything/) | But note that `AllowedIPs` on the client should be `AllowedIPs = 0.0.0.0/0, ::/0` to use as a VPN for everything (more detail here: https://docs.pi-hole.net/guides/vpn/wireguard/route-everything/) | ||
| + | |||
| + | == Example Server Config == | ||
| + | |||
| + | <pre> | ||
| + | [Interface] | ||
| + | Address = 192.168.130.1/24 | ||
| + | ListenPort = 51820 | ||
| + | PrivateKey = PRIV123 | ||
| + | |||
| + | |||
| + | [Peer] | ||
| + | PublicKey = PUB456 | ||
| + | AllowedIPs = 192.168.130.2/32 | ||
| + | </pre> | ||
| + | |||
| + | === Notes === | ||
| + | * Interface | ||
| + | ;Interface Address | ||
| + | : the address of the server and the subnet that will be used for the private network | ||
| + | ;Interface ListenPort | ||
| + | : the port on which the server will listen for connections (51820 is generally used) | ||
| + | ;PrivateKey | ||
| + | :the private key for the server (used to authenticate traffic going back to the peer) | ||
| + | |||
| + | * Peer | ||
Revision as of 06:06, 15 May 2024
Follow these guides:
- https://www.freecodecamp.org/news/build-your-own-wireguard-vpn-in-five-minutes/
- https://www.wireguardconfig.com/
But note that `AllowedIPs` on the client should be `AllowedIPs = 0.0.0.0/0, ::/0` to use as a VPN for everything (more detail here: https://docs.pi-hole.net/guides/vpn/wireguard/route-everything/)
Example Server Config
[Interface] Address = 192.168.130.1/24 ListenPort = 51820 PrivateKey = PRIV123 [Peer] PublicKey = PUB456 AllowedIPs = 192.168.130.2/32
Notes
- Interface
- Interface Address
- the address of the server and the subnet that will be used for the private network
- Interface ListenPort
- the port on which the server will listen for connections (51820 is generally used)
- PrivateKey
- the private key for the server (used to authenticate traffic going back to the peer)
- Peer
