Difference between revisions of "Apache2"
From Briki
m (3 revision(s)) |
|
(No difference)
| |
Revision as of 18:03, 3 November 2007
Enabling/Disabling Mods
- sudo a2enmod mod
- sudo a2dismod mod
SSL
- a2enmod ssl (this just does: ln -s /etc/apache2/mods-available/ssl* /etc/apache2/mods-enabled)
- a2enmod rewrite
- a2enmod suexec
- a2enmod include
- Edit ports.conf and add Listen 443
- Edit sites-available/default and change the lines to look as follows:
NameVirtualHost *:80 <VirtualHost *:80> ...
- Copy sites-available/default to sites-available/ssl and change the above lines to look like:
NameVirtualHost *:443
<VirtualHost *:443>
SSLEngine On
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
SSLCertificateFile /etc/apache2/ssl/bretts_org.crt
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/apache2/ssl/server.pem
...
- ln -s /etc/apache2/sites-available/ssl /etc/apache2/sites-enabled/001-ssl
- /etc/init.d/apache2 force-reload