Difference between revisions of "Speedtouch 780 Tips"
From Briki
(→Useful CLI commands) |
|||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
== Useful CLI commands == | == Useful CLI commands == | ||
| + | |||
| + | ; user config name=Administrator password=mypass | ||
| + | : Set password for user Administrator | ||
; env set var=SESSIONTIMEOUT value=900 | ; env set var=SESSIONTIMEOUT value=900 | ||
: Set telnet session timeout to 15 mins | : Set telnet session timeout to 15 mins | ||
| + | |||
| + | ; wireless ifconfig state=disabled | ||
| + | : Disable wireless | ||
| + | |||
| + | ; system locale dec_symbol=. group_symbol=, | ||
| + | : Set correct numeric grouping and decimal point symbols for UK | ||
| + | |||
| + | ; service system ifadd name=PING_RESPONDER group=wan | ||
| + | : Enable PINGs on WAN interface | ||
| + | |||
| + | ; service system ifdelete name=TELNET group=wan<br>service system ifdelete name=FTP group=wan<br>service system ifdelete name=HTTPs group=wan | ||
| + | : Disable telnet, ftp and https on WAN interface | ||
| + | |||
| + | ; service system modify name=SNMP_AGENT state=enabled<br>snmp community add securityname=ROCommunity communityname=public | ||
| + | : Enable SNMP | ||
; dns server config domain=mydomain.org | ; dns server config domain=mydomain.org | ||
| Line 15: | Line 33: | ||
; dns server host add name=myhost addr=myip | ; dns server host add name=myhost addr=myip | ||
: Add DNS name '''myhost''' for device with IP address '''myip''' | : Add DNS name '''myhost''' for device with IP address '''myip''' | ||
| + | |||
| + | ; ip config natloopback=enabled | ||
| + | : Enable NAT loopback (to allow you to use the WAN IP address/hostname from inside the LAN) | ||
| + | |||
| + | ; dhcp server config state=disabled | ||
| + | : Disable DHCP on LAN | ||
| + | |||
| + | ; dhcp server lease add clientid=macaddr pool=LAN_private addr=ip leasetime=0 macaddr=macaddr | ||
| + | : Define a fixed IP for a given mac address via DHCP | ||
; saveall | ; saveall | ||
: Make setting persistent between reboots | : Make setting persistent between reboots | ||
Latest revision as of 12:31, 1 October 2006
Useful CLI commands
- user config name=Administrator password=mypass
- Set password for user Administrator
- env set var=SESSIONTIMEOUT value=900
- Set telnet session timeout to 15 mins
- wireless ifconfig state=disabled
- Disable wireless
- system locale dec_symbol=. group_symbol=,
- Set correct numeric grouping and decimal point symbols for UK
- service system ifadd name=PING_RESPONDER group=wan
- Enable PINGs on WAN interface
- service system ifdelete name=TELNET group=wan
service system ifdelete name=FTP group=wan
service system ifdelete name=HTTPs group=wan - Disable telnet, ftp and https on WAN interface
- service system modify name=SNMP_AGENT state=enabled
snmp community add securityname=ROCommunity communityname=public - Enable SNMP
- dns server config domain=mydomain.org
- Configure domain name for LAN
- eth bridge ifdetach intf=ethport4
eth bridge vlan ifdelete name=video_gr intf=ethport4
eth bridge ifattach intf=ethport4 - Enable 4th ethernet port (middle step seemed unnecessary for me, but is recommended)
- dns server host add name=router
- Add DNS name router for Speedtouch device
- dns server host add name=myhost addr=myip
- Add DNS name myhost for device with IP address myip
- ip config natloopback=enabled
- Enable NAT loopback (to allow you to use the WAN IP address/hostname from inside the LAN)
- dhcp server config state=disabled
- Disable DHCP on LAN
- dhcp server lease add clientid=macaddr pool=LAN_private addr=ip leasetime=0 macaddr=macaddr
- Define a fixed IP for a given mac address via DHCP
- saveall
- Make setting persistent between reboots
