Speedtouch 780 Tips
From Briki
Useful CLI commands
- env set var=SESSIONTIMEOUT value=900
- Set telnet session timeout to 15 mins
- dns server config domain=mydomain.org
- Configure domain name for LAN
- eth bridge ifdetach intf=ethport4
eth bridge vlan ifdelete name=video_gr intf=ethport4
eth bridge ifattach intf=ethport4 - Enable 4th ethernet port (middle step seemed unnecessary for me, but is recommended)
- dns server host add name=router
- Add DNS name router for Speedtouch device
- dns server host add name=myhost addr=myip
- Add DNS name myhost for device with IP address myip
- ip config natloopback=enabled
- Enable NAT loopback (to allow you to use the WAN IP address/hostname from inside the LAN)
- saveall
- Make setting persistent between reboots
