Difference between revisions of "Speedtouch 780 Tips"

Revision as of 13:19, 1 October 2006

Useful CLI commands

user config name=Administrator password=mypass

Set password for user Administrator

env set var=SESSIONTIMEOUT value=900

Set telnet session timeout to 15 mins

wireless ifconfig state=disabled

Disable wireless

system locale dec_symbol=. group_symbol=,

Set correct numeric grouping and decimal point symbols for UK

service system ifadd name=PING_RESPONDER group=wan

Enable PINGs on WAN interface

service system ifdelete name=TELNET group=wan
service system ifdelete name=FTP group=wan
service system ifdelete name=HTTPs group=wan

Disable telnet, ftp and https on WAN interface

service system modify name=SNMP_AGENT state=enabled
snmp community add securityname=ROCommunity communityname=public

Enable SNMP

dns server config domain=mydomain.org

Configure domain name for LAN

eth bridge ifdetach intf=ethport4
eth bridge vlan ifdelete name=video_gr intf=ethport4
eth bridge ifattach intf=ethport4

Enable 4th ethernet port (middle step seemed unnecessary for me, but is recommended)

dns server host add name=router

Add DNS name router for Speedtouch device

dns server host add name=myhost addr=myip

Add DNS name myhost for device with IP address myip

ip config natloopback=enabled

Enable NAT loopback (to allow you to use the WAN IP address/hostname from inside the LAN)

dhcp server config state=disabled

Disable DHCP on LAN

saveall

Make setting persistent between reboots